A media access control (MAC) address is a 12-digit hexadecimal number assigned to each network-connected device. It uniquely identifies every device during manufacturing and is often located on the device’s network interface card (NIC).
You need the address to locate or perform diagnostics on a specific device. Think of it as a hardware ID. Like your driver’s license, the address has a unique number identifying a particular piece of equipment on your network.
Read More about a MAC Address
Did you know that a MAC address is also known as a “physical address,” “networking-hardware address,” or “burned-in address (BIA)”? Find out why and learn more about it here.
What Is the Difference between a MAC Address and an IP Address?
The primary difference between a MAC address and an IP address lies in the type of device they identify. A MAC address identifies hardware, while an IP address represents software.
They also differ in terms of the network they are for. MAC addresses identify specific devices within the same local network, while IP addresses identify devices outside local networks, like on the Internet.
Finally, the most noticeable difference lies in how they are written. An example of a MAC address for an Ethernet NIC is 00-0a-95-9d-68-16 or 00:0a:95:9d:68:16. They have six pairs of characters split by hyphens or colons. An IP address, on the other hand, looks like 192.0.2.146 for IPv4 (four sets of numbers from 0 to 255 separated by dots) or 2001:0db8:85a3:0000:0000:8a2e:0370:7334 (eight sets of alphanumeric characters split by colons) for IPv6.
What Is MAC Cloning?
While IP addresses and MAC addresses differ, they work together. In fact, some Internet service providers (ISPs) use MAC addresses to assign IP addresses to a gateway device.
In this case, when a device connects to the ISP, the Dynamic Host Configuration Protocol (DHCP) server records the MAC address and then assigns an IP address. The system will thus be identified through the MAC address. When the device gets disconnected, it loses the IP address.
If the user wants to reconnect, the DHCP server checks if the device has connected before. If that is the case, the server tries to assign the same IP address so long as the lease period has not expired. If the router has changed, the user must inform the ISP about the new MAC address because that is unknown to the ISP, so the connection cannot be established.
The user can often simply clone the registered MAC address with the ISP. That lets the router keep reporting the old MAC addresses to the ISP so there are no connection issues.
What Is a MAC Address For?
The address serves several purposes, namely:
- Enables MAC filtering
- Enforces company policies
- Enables mobile device management (MDM)
- Simplifies patch management
- Enhances network security
Media Access Control Filtering
MAC filtering is a technique that lets network administrators decide which devices may join the network.
At home, that gives parents a means to regulate their children’s Internet usage. At work, that gives organizations a way to strengthen their network security.
Company Policy Enforcement
It is difficult to monitor what every employee does on any given day. That is where a centralized directory system that identifies each device by its MAC address comes in handy. The system can streamline granting permissions, deploy applications efficiently, and enforce secure use across various devices.
Mobile Device Management
Did you know that 66% of employees use two or more devices daily, including desktops, laptops, smartphones, and tablets? That translates to at least twice the number of employees to manage and secure for network administrators daily.
Using MAC addresses lets administrators oversee all mobile devices remotely, ensuring company policy adherence and security.
Patch Management
Patch management, the process of applying updates to software, drivers, and firmware on all hardware to protect against vulnerabilities via a centralized system, is one of the ways administrators secure networks. It will not be possible without MAC addresses.
Network Security
Organizations employ MAC filtering, network monitoring, MDM, and patch management to ensure a good cybersecurity posture. All that, as you have seen above, will not be possible without MAC addresses.
What Are the Advantages of Using MAC Addresses?
Using the address poses several advantages, namely:
- Each address is unique, allowing administrators to easily identify and manage network-connected devices.
- The addresses are easy to configure and manage and do not require any additional network infrastructure.
- They are widely used and supported by various networking technologies and protocols, guaranteeing system compatibility.
- They can restrict network access to only authorized devices.
- They can pinpoint any faulty device for replacement without affecting the network.
- They enable multicasting or broadcasting, easing network communication and management.
- They enable efficient network communication.
- They reduce network overhead by letting devices communicate directly with each other without additional routing or addressing.
- They can be used to troubleshoot network issues by identifying the source of problems and tracking network activity.
- They can support various network configurations and topologies.
What Are the Disadvantages of Using MAC Addresses?
Despite the advantages the address brings to users, it has downsides, too.
Limited Address Space
The addresses are 48-bit numbers, so their number is finite. This can lead to address conflicts if multiple devices have the same MAC address.
Spoofing
The addresses can be spoofed easily, which could lead to unauthorized devices gaining network access.
Inefficiency
The addresses are not hierarchical, making it hard for administrators to manage large networks efficiently.
Static Addressing
The addresses are assigned when a device is manufactured and cannot be changed easily. This can be disadvantageous if devices need to be reconfigured or replaced.
Limited Scope
The addresses can only identify devices within a local network segment but not outside it.
Hardware-Dependent
The addresses are tied to devices’ NICs, which means if the cards fail or are replaced, the addresses also change.
Lack of Encryption
The addresses are sent in plain text, making them vulnerable to interception and eavesdropping.
No Inherent Security
While MAC filtering can restrict network access, the addresses do not provide inherent security features.
MAC Address Collision
In rare cases, the addresses can collide. This can cause network disruptions and make it hard for administrators to identify and manage connected devices.
How Do You Find a Device’s MAC Address?
It is easy to find the address on any device. But, doing so does change slightly based on a device’s operating system (OS). Regardless of your OS, though, you will need to check your network settings.
Take a closer look at the steps for some of the most popular OSs today.
Windows
- Use the Command Prompt.
- Hit the Windows key, then type cmd.
- Press Enter to open the Command Prompt window.
- Type ipconfig /all and hit Enter.
- The network adapter will display details.
- Find your MAC address in the Physical Address field.
If you do not want to use the Command Prompt. Follow these steps:
- Check out the Control Panel’s Network Connections area.
- Right-click your current network connection.
- Choose Status then Details.
- You can find your MAC address denoted as Physical Address.
macOS
- Click the Apple icon in the upper-left corner of your screen.
- Choose System Preferences.
- Click Network and select your currently active network connection.
- Hit Advanced and the Hardware tab, where you will find your MAC address displayed.
Linux/Unix
- Open a terminal or console window.
- Type ifconfig and hit Enter.
- Find your MAC address in the ether field.
Android
- Open the Settings app.
- Scroll down and select About Phone or About Device. Note that the exact wording can vary depending on your device.
- Tap Status or Hardware Information.
- Look for Wi-Fi MAC address or MAC address, and that’s it.
For other devices, you can find guides here.
What Are the Types of MAC Addresses?
Three types of MAC addresses exist—unicast, multicast, and broadcast. Watch this video to see how they differ.
Unicast
A unicast address points to a specific NIC on a local network. This address is used when a single transmitting device sends a frame to a single destination device. Think of it along the lines of one-to-one communication.
Multicast
A multicast address lets a source device transmit a data frame to multiple devices simultaneously so long as they belong to the same multicast group. Think of it as sending a memo to all the members of a particular department.
Broadcast
A broadcast address allows a source device to simultaneously send a frame to all the devices on a given network. Think of it as sending an email blast organizationwide.
Can a Device Have More than One MAC Address?
A device may have more than one MAC address. In fact, most devices have two—one each for the wired and wireless Ethernet cards.
How Do MAC Addresses Get Assigned?
As previously mentioned, the addresses are hardcoded into devices’ NICs, which are the hardware components that connect a device to a network.
The first half of the address identifies the NIC manufacturer, while the second half is a unique identifier assigned by the manufacturer. This method keeps MAC addresses unique worldwide.
Can a MAC Address Change?
No, the address is permanent and hardcoded in the NIC. Note, though, that many drivers allow the address to be changed. But it can be masked or spoofed through software for privacy reasons or testing.
—
The address is essentially any hardware’s ID. It helps in networking and equipment troubleshooting.
Key Takeaways
- A MAC address is a 12-digit hexadecimal number assigned to each network-connected device.
- It uniquely identifies every device during manufacturing and is often located on its NIC.
- MAC addresses differ from IP addresses regarding the types of devices they identify, the networks they are for, and how they are written.
- The address enables MAC filtering, enforces company policies, enables MDM, simplifies patch management, and enhances network security.
- The addresses are unique, simple to configure and manage, widely compatible, and fault-tolerant, making them ideal for networking.
- Using the address can pose disadvantages, including lack of encryption, limited scope, and possible collision.
- The address comes in three types—unicast, multicast, and broadcast.
- A device usually has two MAC addresses—one each for the wired and wireless Ethernet cards.
- NIC manufacturers assign MAC addresses.
- The address is permanent and cannot be changed.
Sources
- https://services.pitt.edu/TDClient/33/Portal/KB/ArticleDet?ID=1773
- https://its.weill.cornell.edu/guides/how-to-find-your-wireless-mac-address
- https://www.geeksforgeeks.org/mac-address-in-computer-network/






